|
Before using Evapo-Rust™
After soaking for two hours!
Safe+Simple+Effective+Environmentally
Friendly+Economical
Rust is removed with no excessive metal wear
that is associated with sand or bead blasting.
NEW!
Click here to see how the U.S. military uses
Evapo-Rust to save time & money!
Industrial
users call us any time for a
FREE
sample of . 1-800-255-7968
It is available now in
1-gallon bottles, 1-gallon 4-paks,
5-gallon pails and 55 gallon drums. Call for price!
Directions to use Evapo-Rust™
Preclean item if covered in heavy oil and dirt. Rinse item and immerse item fully
in Evapo-Rust™ for 20 minutes. Check progress periodically. Once rust is removed,
rinse item with water. To prevent re-rusting simply dip the item back in Evapo-Rust™
solution and allow to dry. Deeply rusted parts (5mm or deeper) may require overnight
soaking.
Evapo-Rust™ can be used over until performance
drops off. When ready to dispose of spent Evapo-Rust™, only the iron content of the
solution will dictate disposal method. In most cases, it can be safely put down the drain.
NOTE
Tool alloy steel and other high carbon steels will have a slightly darker finish after
de-rusting with Evapo-Rust™
CAUTION
Rusty items with edges may become sharp once de-rusted. Handle with caution.
Industrial users
call us for a FREE sample!
Call Doug or Frank at 800-255-7968
Doug's Home # 865-435-4588 Cell # 865-742-8247
Send us a fax at 865-435-6172
Send us an e-mail at tortrans@callbb.com
Write us at: PO Box 156 Coalfield TN 37719
* Note: All brand names mentioned are trademarks or
registered trademarks of the original equipment manufacturers
they are used for
reference purposes only and are not intended to imply any association.*
Last Update
Tuesday, March 09, 2004
|
