B&B Enterprises is an authorized distributor of
HAYDEN cooling products.
DSCN5516.jpg (35921 bytes)


We can supply transmission and engine oil coolers for
dozers, trackhoes and other heavy and offroad equipment.


  • Transmission oil coolers
    An auxiliary transmission oil cooler is an economical way to protect against costly transmission repairs caused by excessive heat in automatic transmissions. Automatic transmission fluid cools, lubricates and cleans internal transmission components. But when transmission temperatures exceed 200 degrees, the performance of the transmission fluid is greatly diminished. The results are reduced life span of fluid, seals and moving parts and increased wear of friction and clutch plates.


    Hayden transmission coolers can reduce transmission temperature by as much as 60 degrees. (A reduction of just 20 degrees can double the life of an automatic transmission, the fluid and all internal parts.)

  • Engine oil coolers
    Heat is the enemy of motor oil, and today's machines produce extremely high temperatures. Under normal operating conditions, oil crankcase temperatures can reach 245 degrees or higher. Maximum load conditions can cause temperatures to exceed 275 degrees. An engine oil cooler can reduce wear and extend the life of all internal engine components by maintaining an oil temperature range of 180 to 210 degrees.

                                      

Hayden Transmission and Engine Oil Cooler Specifications
Hayden Model No. Size / Inches
H x L x T
Fitting
Size / Inches
FPT
CPM
Range
Cooling
BTU / hr*
1233** 10 x 12 x 3/4 3/8 2-10 7277 - 12,925
1215 4 x 15 x 1-1/2 1/2 1-8 5980 - 8560
1234 6-1/2 x 15 x 1-1/2 1/2 1.5-12 8971 - 12,841
1240 6-1/2 x 18 x 1-1/2 1/2 1.5-12 10,910 -16,160
1236 8-1/2 x 18 x 1-1/2 1/2 2-16 14,547-21,545
1241 8-1/2 x 21 x 1-1/2 1/2 2-16 16,915-25,910
1268 12-3/4 x 18 x 1-1/2 3/4 3-24 21,197 - 31,218
1260 12-3/4 x 24 x 1-1/2 3/4 2-24 28,104 - 44,256
1284 16-3/4 x 24 x 1-1/2 3/4 4-32 37,472 - 59,038
1290 18-3/4 x 24 x 1-1/2 3/4 4.5-36 42,156 - 66,384
2271*** 20-1/4 x 24 x 3 3/4 9-36 82,917 - 114,329
1299** 22-1/8 x 24 x 1-1/2 3/4 2.5-10 36,538 - 60,963
1292 25 x 24 x 1-1/2 1 6-48 55,148 - 86,365
1286 24 x 24 x1-1/2 1 3-24 43,252 - 82,824
2292*** 26-7/8 x 24 x 3 1 6-48 83,510 - 152,439
1271** 26-3/4 x 30 x1-1/2 1 3-12 49,324 - 89,575
2305 31 x 24 x 1-1/2 1 7.5-60 68,935 - 107,957
1277 28 x 33 x 1-1/2 1 7-56 84,046 - 144,994
2306 31 x 30 x 1-1/2 1 7.5-60 83,625 - 139,763
1297 37-1/4 x 30 x 1-1/2 1-1/4 9-72 98,998 - 164,574
1298 37-1/4 x 40 x 1-1/2 1-1/4 9-72 122,577 - 226,099
2312 41-3/4 x 42 x 1-1/2 2 10-80 149,562 - 264,531
2297*** 45 x 41 x 3 2 118-144 235,918 - 415,718

* @ 2500 FPM Airflow @ 100° F ITD oil to air
** Two Pass Cooler for low flow conditions (Ideal for Allison Transmissions)   

*** Two Row Coolers, One Pass


Call us for more information on Hayden transmission and engine oil coolers or other Hayden products, or go back to B&B's home page to find out about our transmission rebuild and exchange program.


 

Transmission Exchange Lapping Dep. Hydrostatic Dep. Hayden Oil Coolers Warranty Info  About B&B B&B's Pictures Oil and Filtration Made Simple Rust Removal with Evapo-rust™ Kuraki CNC Mill

Call Doug or Frank at 800-255-7968
Doug's Cell # 865-742-8247
Send us a fax at 865-435-6172
Send us an e-mail at tortrans@callbb.com
Write us at: PO Box 156 Coalfield TN  37719


* Note: All brand names mentioned are trademarks or registered trademarks of the original equipment manufacturers they are used for reference purposes only and are not intended to imply any association.*

Last Update Monday, August 22, 2005